DIY Embroidery Projects – Felt Crafts – Christmas Decoration !
Every year I want to decorate the New Year tree with new toys. If you make them with your own hands, then the festive mood is provided for all days. Therefore, we will make a house from the firth with our own hands in this New Year’s master class, show what a proper pattern should be, and decorate the craft with beads, beads and snowflakes .
For sewing felt house we will need:
• felt of red and white colors;
• red and white threads for embroidery;
• green and silver beads;
• Sequins of red color;
• white satin ribbon;
• Red satin ribbon;
• Needle for embroidery with beads;
• a piece of chalk;
• glue with sparkles;
• white and red half-beads;
• glue gun.
For the house we draw with chalk and cut out of red felt two squares measuring 10×10 cm. From white felt we cut out two isosceles triangles with a base of 15 cm and a height of 7 cm.
We will sew all the details with a stitch seam. Therefore, add two white triangles so that their edges coincide and begin to stitch upwards from the right lower corner with red threads. Form the loop, string the bead and tighten the new loop, making an indentation of 0.5 cm. Each stitch should be located at the same distance and be of the same length.
Stitch only the two upper sides of the triangle. Through the lower part we will fill the triangle with the synthepon.
Now tie the knot on one of the ends of the thread and thread the needle through one upper layer, pulling the needle upward. We string a green bead, indent and thread the needle down and then bring it up again. We embroider beads as a stitch. It is desirable that the bead is attached to the bead and they form a continuous curved line.
Thus, we embroider a few branches, as if they are starting from the lower right corner. At the end of each branch, we remove the needle upward, thread a sequin, a bead and bring the needle down through the hole of the same sequin.
We embroider in this way a beautiful twig. You can embroider these branches in different places or across the roof, if you have free time.
Now you need to make a loop, for which you can hang the toy on the branch of the tree. Cut off the satin ribbon 20 cm long and bend it in half. We form a triangle from the ends of the tape. One end of the glue in front of the house , and the other on the back. In the upper corner of the front part we glue the bow of red satin ribbon.
Stitching with white thread sewn without beads only three sides of two folded squares together. Stitches are made of the same length and at the same distance as the edge of the roof was stitched together. Then, on the upper layer, we sew white snowflakes with snowflakes . First we embroider a cross from perpendicular lines, and then overlap them with diagonal lines.
We fill two sewn blanks with sintepon. Synthesis should be filled so that the edges of both blanks freely glued together.
We glue both layers of the non-sewn edge of the red square and insert it by gluing in the middle of the white preform.
We decorate the roof cornice with half-buoys of red and white color. We take the beads with tweezers, then apply the glue on the back side and attach it to the felt. The left lower corner is decorated with glue with sparkles, imitating frosty patterns.
Now you can safely decorate the Christmas tree with such a beautiful holiday toy.