DIY Embroidery Stitches – Padded Straight Stitch !

0
215

DIY Embroidery Stitches – Padded Straight Stitch !

Padded Straight Stitch

1. To start, bring the needle out at A.
2. Work a straight stitch by going down at B and back up at A (same hole). Pull the stitch through. This is stitch #1.
3. Slide a pin or a blunt tapestry needle under this stitch (#1).
4. Slide the thread from A behind the pin on the right-hand side and go down at B.
Pull the stitch into position.
5. Slide the thread from A behind the pin on the left-hand side and go down at B.
Pull the stitch into position. The pin will hold the second and third stitches so they sit side-by-side with the first stitch.

4

6. Remove the pin and slide it back under stitches 1, 2 & 3.
7. Repeat the sequence. Slide the thread from A behind the pin on the right-hand side and go down at B. Pull the stitch into position.
8. Slide the thread from A, behind the pin on the left-hand side and go down at B.
Pull the stitch into position.
9. Continue with this sequence, alternating right and left until you have a petal the size you desire.

item_XL_8277568_7864070

LEAVE A REPLY

Please enter your comment!
Please enter your name here